Be safe out there with Serfas' TL-STN Seat Stay Taillight. This water-resistant safety beacon will get you noticed out on the road with a large, super-bright 1/2-watt red LED flanked by 6 brilliant smaller LEDs. Plus, the weatherproof silicone body stretches to easily mount to any tube on your bike. Use a few Seat Stay Taillights for 360-degrees of visibility! This great light has steady, strobe and flash modes.
The Serfas E-Lume Series light line was developed to be the best on the market at the very best value. These headlights will meet and exceed their expected lumen output while offering you all the features you've come to enjoy from Serfas lighting. - Compact Lightweight Aluminum Design - Super Bright (1200 Lumens) Output - Water Resistant Rating: IPX6 - 3 Level Battery Life Indicator - Last Mode Memory - Max Charges Rate of 2A - Charges from Dead to Fully Charge in 2.5 hours (Using 2A Rated Charger) Specs: - Solid Modes: Overdrive (1200 Lumens): 1.5 hrs, High (700 Lumens): 3 hrs, Medium (400 Lumens): 4.5 hrs, Low (200 Lumens): 9.5 hrs - Flash Modes: Daytime Flash (1200 Lumens): 30 hrs, Low Flash (200 Lumens): 40 hrs - Weight: 240 Grams with Bracket - Battery: LG 2-Cell Li-Ion, 2200mAh Includes: - Micro USB Cord - Handlebar Mount
Stay safe and super visible on the streets with the easily-integrated Lumaray light. Powered by Chip-On-Board (COB) technology, the extremely bright, wrap-around LEDs provide 270-degree visibility, lighting up your more dangerous blind spots. The slim design fits seamlessly between your Garmin and its mount, cutting out the clutter and keeping your ride as streamlined as possible. - 30 lumen COB LEDs - Integrated GPS mounting - Tough nylon case - USB charging - 270-degree visibility Run times: - High: 2hrs - Medium: 3.5hrs - Low: 7.5hrs - Flash: 7hrs
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
A daytime running light is the easiest and best way to keep riders safe and visible. The Ion 200 RT provides the proven safety of a daytime running light in a compact and powerful USB rechargeable package, and it features a distinctive flash pattern that's visible from up to 2km away. Product details - Specifically designed focus, flash, and range for ultimate daytime visibility - 200 Lumens via high-power CREE LED - Integrated light sensor auto-adjusts brightness to your environment - Connect with Garmin and Bontrager ANT+ devices for always on, battery status, and wireless control - 200LM-1.5hrs, 100LM-3hrs,5LM-14.5hrs, Night Flash-30hrs, Day Flash-12hrs - Easily attaches to your handlebars, helmet, or bike mount - Blendr compatible bar mount available - Includes Ion 200 RT, front Quick Connect bracket, and mini USB charging cable
With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-65 standard - 3 hour recharge time - 18g / 0.04lb each As Front: - 60 Lumens - Runtime: High 1.5hrs, Flashing 5hrs As Rear: - 20 Lumens - Runtime: High 1.5hrs, Flashing 5hrs
The 2'Fer-XL is the big brother of Blackburn's popular 2'Fer light. This light works hard, pulling double duty as either a 200 lumens front or a 40 lumens rear light, depending on your needs. The clever mount design lets you easily pop it onto your bike's handlebar or seat post, or use the clip to mount it on your backpack or belt. - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-67 standard - Optimized lenses - LED Fuel Gauge/Charge Indicator - Aluminum construction - Three hour recharge time - 78g / 0.17lb each Front: - 200 Lumens - Runtime: High 2hrs, Flashing 6hrs Rear: - 40 Lumens - Runtime: High 4hrs, Flashing 12hrs
Not too long ago, a 400 lumen headlight for this price would have been a pipe dream, but now the Blackburn DayBlazer 400 is a dream come true! Featuring eye-popping BLITZ daytime running mode to grab the attention of cars, IP-67 submersibility, and ample side visibility, the DAYBLAZER 400 puts light where riders need it most. - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 3 hour recharge time - LED Charge Indicator - Runtime: High 1hr (400 lumen), Low 5 hrs (200 lumen) - Runtime Pulse/Strobe: 6hrs (200 lumen)/10 hrs (200 lumen) - 59g
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
Key features - Reflector mount for first and second generation Speed Concept seatposts - To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Ride safe and be seen at night with the high-performance helmet light. Innovative double-sided helmet-mounted light shines white facing forward and red towards the rear, and features 4 LEDs for excellent visibility. Rubber straps provide easy installation and flexible mounting options on a helmet. - Max Luminous Intensity: 140 Lumens (Front), 10 Lumens (Rear) - Lamp: 2 white high power LED’s (Front), 2 red high power LED’s (Rear) - Battery: 3.7V 680mAh Lithium Ion (integrated) - Control/Burn Time (approximate): 3.3hr (High), 5.5hr (Middle), 33hr (Low), 28hr (Front: Middle / Rear: Blinking) - Charge Time (approximate): 2hr / Micro USB - Input: 5V 500mA - Lamp Housing: Injection molded polymer - Strap Mount: Fits helmet / road bike dropbar - Waterproof: IPX 6 - Low battery indicator - Size: 6.9 x 4.4 x 2cm / 2.7” x 1.7” x 0.8” - Weight: 40g / 1.41oz
Topeak's Tail Lux helmet light mounts to any helmet or Topeak bag or rack with ease. Its constant and blinking modes ensure you'll be seen. A nice supplement to your regular light set, the Tail Lux is a convenient way to add extra safety to your commute. Plus, the coin battery is included.
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.
-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter
Minimal and mighty! The USB rechargeable Asteroid headlight from Portland Design Works mounts in seconds and shines super brightly with high-quality optics so you can be seen. Ride for up to 24 hours before needing a new charge. - 3 Modes (burn time): Flash (24 hrs), Pulse (5 hrs), Steady (4 hrs) - UV Proof rubber mount - Double-click lens to turn on/off - Micro USB charge cord included - Weatherproof exterior for all season riding - Weight: 73 g (2.6 oz)
Minimal and mighty! The USB rechargeable Asteroid tail light from Portland Design Works mounts in seconds and shines super brightly with high quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Ride up to 35 hours before needing a charge. Pairs nicely with the Asteroid Headlight - also available as a light set. - 3 Modes (burn time): Flash (35 hrs), Pulse (6.5 hrs), Steady (4.5 hrs) - Weatherproof exterior for all season riding - Micro USB recharging cord included - Weight: 76 g (2.7 oz)
Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)
The Portland Design Works Daybot Tail Light has a CREE LED to power a 100 lumen Daytime Pulse mode for increased visibility on sunny days. Switch from Day Modes to Night Modes to conserve battery power. Hold the power button down for 1 second to turn the light on or off. The Daybot Tail Light has redesigned mount that works with the included seatpost and seatstay brackets. - 2 Day Modes (runtime): Solid - 60 lumens (6 hours), Pulse - 100 lumens (20 hours) - 3 Night Modes (runtime): Solid - 20 lumens (20 hours), Flash - 20 lumens (100 hours), Pulse - 20 lumens (30 hours) - USB rechargeable li-polymer battery - Weatherproof exterior for all season riding - Includes brackets for seatpost and seatstay mounting - Mounts vertically or horizontally - Includes Micro USB recharging cord - Weight: 1.9 oz - Lifetime Warranty
Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike. - Bright red LED and precision reflector - Bolts directly to fender to prevent theft - Weatherproof exterior for all season riding - Weight: 62 g (2.2 oz) - Runs on 2xAAA batteries (included) - Lifetime PDWarranty
The Portland Design Works Mission Control 2.0 Headlight Mount is now easier to use! Wrap the heavy-duty UV-proof rubber strap around your handlebars and you're ready to blast off in seconds. - Fits 22.0-31.8 mm diameter handlebars - Compatible with all PDW headlights.
The Pathfinder USB Headlight from Portland Design Works is unlike any other bike light on the market, incorporating technologies to help you see and be seen while riding, day or night. The Vertical Cutoff Beam is designed to focus the 200 lumen main beam onto the road in front of you and prevents lost lumens that can blind oncoming traffic. For daytime riding, the Daytime Running Flash is bright enough to make you seen even on the brightest days. The Battery Meter lets you know exactly how much battery life you have left before needing to recharge with the included USB cord. The Pathfinder includes a powerful lithium-ion battery and a darkness destroying CREE LED bulb. It provides superior luminous guidance for up to 25 hours of ride time. The rugged construction is weatherproof and strong enough to handle the abuse of an urban commute. - 4 Modes: Steady low (4 hours), Steady high (2 hours), Pulse (8 hours), Daytime Flash (25 hours) - Lumens and burn times certified by Labsphere Illumia Light Measurement System to FL1 standard - Vertical Cutoff Beam to focus 200 lumens on the road ahead - CREE LED - Battery Meter for Li-ion battery - Micro USB charging cord included; 3 hour charging cycle - Weatherproof exterior for all season riding - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Includes UV-proof quick on/off handlebar mount - Weight: 57 g (2 oz)
Portland Design Works' Radbot 1000 Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and a precision reflector to notify others of your presence. And, the Radbot includes mounts for a rack, seatpost, seatstay, and backpack, so you can put it wherever you want. - 1.0 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty
Portland Design Works' Red Planet Taillight will enhance your visibility after dark. It boasts five bright LEDs with three modes to notify others of your presence. And, the Red Planet includes mounts for a seatpost, seatstay, and backpack, so you can put it wherever you want. - Five red LEDs - Steady, blinking and dance modes - Stayputnik mount included - Runs on 2xAAA batteries (included) - Weatherproof exterior for all season riding - Weight: 45 g (1.6 oz)
Put on the high beams for extra visibility even in the dark corners of space. Portland Design Works' Spaceship Headlight boasts 3 bright LEDs which shine through a precision lens for a bright, focused beam. It offers steady and flashing modes and has a run time of over 100 hours. - Fits 22.0-31.8mm handlebars - Runs on 2 x AA batteries (included) - 100 hours run time - Steady and flashing modes - 91 grams/3.2 ounces - 98 x 41 x 35mm
Portland Design Works' Spaceship 3 Headlight/Radbot 500 Taillight Set offers bright LED lights, front and rear, for super nighttime visibility. The Spaceship 3 headlight focuses three brilliant LEDs through a precision lens, illuminating your course ahead. Powered by 2xAA batteries, the Spaceship 3 includes both steady and flashing modes for up to 100 hours of run time. Includes the Mission Control 2.0 mount. The RADBOT 500 is equipped with a blazing 0.5 watt LED and a large precision reflector to provide visibility to your backside. Powered by 2xAAA batteries, the RADBOT has three modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time. It also features an on/off switch that must be depressed for 1.5 seconds to turn the light on and off. This helps prevent the RADBOT from being accidentally turned on when you're transporting it in your pocket or bag off the bike. Spaceship 3: - Three bright white LEDs - Runs on 2xAA batteries (included) for up to 100 hours of run time - 2 Modes: Steady and Flashing - Weatherproof exterior for all season riding - Includes Mission Control 2.0 mount - Weight: 91 g (3.2 oz) - Lifetime PDWarranty Radbot 500: - 0.5 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty
Portland Design Works' Spaceship 3 Headlight/Red Planet Taillight Set offers bright LED lights, front and rear, for super nighttime visibility. The Spaceship 3 headlight focuses three brilliant LEDs through a precision lens, illuminating your course ahead. Powered by 2xAA batteries, the Spaceship 3 includes both steady and flashing modes for up to 100 hours of run time. Includes the Mission Control 2.0 mount. The Red Planet is a bright, budget-friendly tail light that burns with the power of five red LEDs. The Red Planet runs on 2xAAA batteries and has three modes: steady, blinking, and dance. The Stayputnik seat post mount, with a UV-proof rubber strap, is included. Spaceship 3: - Three bright white LEDs - Runs on 2xAA batteries (included) for up to 100 hours of run time - 2 Modes: Steady and Flashing - Includes Mission Control 2.0 mount - Weatherproof exterior for all season riding - Weight: 91 g (3.2 oz) - Lifetime PDWarranty The Red Planet: - Five red LEDs - Steady, blinking and dance modes - Stayputnik mount included - Runs on 2xAAA batteries (included) - Weatherproof exterior for all season riding - Weight: 45 g (1.6 oz) - Lifetime PDWarranty
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
Page 1 of 8 Next page