Skip to main content

Open for In-Store Shopping  |  Curbside Pickup Available

Filter By:

Wheels

WTB KOM Tough 29-inch
$108.95 - $139.99
Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig, WTB's KOM Tough rims are extruded from top-tier alloy to provide utmost durability at a reasonable weight. Their legendary I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world's most aggressive riders. KOM Tough rims are proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area.
WTB TCS AL 34mm Presta Valve
$24.95
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm
Stan's NoTubes Rim Tape
$11.25 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's NoTubes Tubeless Valve Stems
$16.00 - $22.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Origin8 Bolt Alloy MTB XC Wheelset 27.5-inch
$529.99
- Origin8 Bolt 23mm inner width AL6061-T6 alloy tubeless ready disc brake clincher with sleeved joint, eyeletted spoke holes, and post-anodized sanded gloss black finish - Origin8 Elite convertible MTB disc hubs with anti-bite Shimano cassette body featuring 6 pawl/54 point/6.6ยบ engagement - 32 hole 15TA front/32 hole 12TA rear 6 bolt MTB disc hubs laced with J-bend DT Swiss Competition spokes - Weight: 838g front/932g rear - ISO-Mountain certified and assembled in the USA - Width ID (mm): 23 - Axle: Thru 15mm - Thru 12mm - Rim Color: Blk - Rim Model: OR8 Bolt Alloy MTB XC - Hub Model: OR8 MT-1110 Elite MTB - O.L.D.: 100mm/142mm - Hub Color: Blk - Gears: 8-11s Cass - Brake Type: 6B - Spoke Type: DT-2.0/1.8 BK - Spoke Count: 32H - Wall: Dbl - Valve: PV Type: Tubeless Compatible
Origin8 MT-2100 MTB Front Hub
$75.00
- Aluminum hub body - Sealed bearings - 100mm OLD - 6-bolt disc rotor mount
FSA Rim Strips
$5.99
Protect your tubes without adding bulk with these Rim Strips from FSA. They're lightweight, and come in different lengths according to wheel size. Peace-of-mind comes standard.
DT Swiss RWS MTB Rear Thru Axle - X-12 System w/Plug-in Lever
$69.99
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Conical X12 washer, compatible with Syntace X-12 system - Removable, plug-in lever design is streamlined and protects your RWS lever - Thread Pitch: 12 x 1.0mm
Page 1 of 1